Product Details
4 Inch Submersible Well Pump (4 Inch 2T)
1.Product Introduction
Product Features
Compact structure, high lift,noiseless, pollution-free, easy too mounting and installation
Complete electrical protecting controller device to avoid situation such as : low voltage/over volatge, overload, over-flow, waterless.etc
Application voltage 150-230V, start by 80V
High Flow, High Delivery, High Efficiency
Better performance of anti-sand with ceramic structure
|
Operating Conditions
Maximum fluid temperature up to +35℃
Maximum sand content:0.25%
Maximum immersion:120m
Minimum well diameter:4 Inch
|
Motor and Pump
Rewindable motor or full obturated screen motor
Three-phase:380-415V/50Hz
Single-phase:150-230V/50Hz
Equip with start control box or digital auto-control box
|
Applications
For water supply from wells or reservoirs
For domestic use, for civil and industrial applications
For garden use and irrigation
|
Options on request
Special mechanical seal
Other frequency 60Hz
|
Warranty:1year
According to our general sales conditions
|
2.Product Parameter(Specification)
4S□2T PERFORMANCE DATA 50Hz Outlet: :G1"-1¼"
MODEL |
POWER |
|
|
|
DELIVERY |
n=2850 r/min |
1~ |
3~ |
(KW)
|
(HP)
|
Q
|
m³/h |
0 |
1 |
2 |
3 |
4 |
5 |
6 |
220-240V |
380-415V |
L/min |
- |
17 |
33 |
50 |
67 |
83 |
100 |
4S M2/5-0.25J |
4S 2/5-0.25J |
36 |
32 |
|
36 |
32 |
29 |
26 |
21 |
15 |
6 |
4S M2/7-0.25D |
4S 2/7-0.25D |
50 |
44 |
50 |
44 |
40 |
36 |
29 |
20 |
8 |
4S M2/8-0.37J |
4S 2/8-0.37J |
57 |
50 |
57 |
50 |
46 |
42 |
33 |
23 |
9 |
4S M2/9-0.37D |
4S 2/9-0.37D |
64 |
57 |
64 |
57 |
51 |
47 |
37 |
26 |
10 |
4S M2/11-0.55J |
4S 2/11-0.55J |
78 |
69 |
78 |
69 |
63 |
57 |
45 |
32 |
12 |
4S M2/12-0.55D |
4S 2/12-0.55D |
85 |
76 |
85 |
76 |
38 |
62 |
49 |
35 |
13 |
4S M2/14-0.75J |
4S 2/14-0.75J |
99 |
88 |
99 |
88 |
80 |
73 |
57 |
41 |
15 |
4S M2/16-0.75D |
4S 2/16-0.75D |
114 |
101 |
114 |
101 |
91 |
83 |
66 |
46 |
18 |
4S M2/19-1.1J |
4S 2/19-1.1J |
135 |
120 |
135 |
120 |
108 |
99 |
78 |
55 |
21 |
4S M2/21-1.1D |
4S 2/21-1.1D |
149 |
132 |
149 |
132 |
120 |
109 |
86 |
61 |
23 |
4S M2/24-1.5J |
4S 2/24-1.5J |
170 |
151 |
170 |
151 |
137 |
125 |
98 |
70 |
26 |
4S M2/26-1.5D |
4S 2/26-1.5D |
185 |
164 |
185 |
164 |
148 |
135 |
107 |
75 |
29 |
4S M2/30-2.2J |
4S 2/30-2.2J |
213 |
189 |
213 |
189 |
171 |
156 |
123 |
87 |
33 |
— |
4S 2/30-2.2J |
249 |
221 |
249 |
221 |
200 |
182 |
144 |
102 |
39 |
— |
4S 2/40-3J |
284 |
252 |
284 |
252 |
228 |
208 |
164 |
116 |
44 |
— |
4S 2/45-3J |
320 |
284 |
320 |
284 |
257 |
234 |
185 |
131 |
50 |
— |
4S 2/52-4J |
369 |
328 |
369 |
328 |
296 |
270 |
213 |
151 |
57 |
— |
4S 2/60-4J |
426 |
378 |
426 |
378 |
342 |
312 |
246 |
174 |
66 |
4S□ in the above table can be replaced by any of 4SH, 4SD, 4SS,4QJ
Components |
Material |
Pump external casing |
AISI 304 SS / 201 SS |
Delivery casing |
① Cast-Cu ASTM280 ② AISI 304 SS |
Suction lantern |
① Cast-Cu ASTM280 ② AISI 304 SS |
Diffuser |
Plastic PC |
Impeller |
Plastic POM |
Shaft |
① AISI 316 SS ② AISI 304 SS |
Shaft coupling |
① AISI 316 SS ② AISI 304 SS |
Wear ring |
AISI 304 SS |
Motor external casing |
AISI 304 SS |
Top chock |
① Cast- Cu ASTM280 ② Cast- iron G20UN|5007 |
Bottom support |
AISI 304 SS |
Mechanical seal |
Special seal for deep well (Graphite-SiC/TC) |
Shaft |
AISI 304 SS-C1045 |
Bearing |
NSK / C&U |
Seal lubricant oil |
Oil for food machinery and pharmaceutic use |
3.Product Feature And Application
Garden water
Farmland Irrigation
Landscape Fountion
Domestic Water
Sewage Discharge
Industrial Water
4.Production Details
5.Product Qualification
6.Application conditions
The following conditions must be observed when using the water pump
1 They must be used in compliance with laws.
2 The pump is used for the small diameter well. It is widely used to the area of low water level, high head and far distance to draw water.
3 These pumps are recommended for pumping clean water and chemically non-aggressive fluids.
4 They are not suitable for pumping inflammable liquids or for operating in places where there is danger of explosion.
5 When storing, do not pile weights or other boxes on top.
6 The manufacturer declare all responsibility in the event of accident or damage due to negligence or failure to observe the instructions described in this booklet or in conditions that differ from those indicated on the rating plate. It also declines all responsibility for damage caused by improper use of the water pump.
7. Our services
* Sample service : Sample ,we can supply as customer specify requires , and customer need take the EXPESS cost .after received the official order , we can give return sample fee to customer . |
* Customized Service: 1.Accept OEM 2. 1 YEARS warranty from ETD 3. Promise that produce the quality products and meet the customer requires . |
* After sale service : 1.During the warranty time can replace a new one . 2. Our engineer and sales team can visit our core agent for promotion |
http://www.hoouyau.com/